Recirculating Chillers
Sigma Aldrich Fine Chemicals Biosciences WilmadR quick pressure val1EA
Specially designed to simplify the work of NMR scientists performing catalytic gas-liquid phase reactions air sensitive samples and elevated temperature studies using low boiling point solvents and can be used for EPR spectrometry too.The Quick Pressure Valve can also be attached to a quartz sample tube for EPR by using a graded seal that connects the Pyrex portion of the valve to the quartz tube.Easy to operate - one turn to open one turn to closeLarger opening for convenient sample additionLight weight concentric design for better performanceUnions and fittings for both 1/16 in. and 1/8 in. tubing
Julabo USA Inc Each, FC600 recirculating chiller 0.6kW
Chillers, Julabo, FC600 Recirculating Cooler -20...+80 °C, 0.6kW cooling power; pump 20L/min to 7.3 PSI. JULABO FC units feature two separate Multi-Displays (LED) for actual and set point values. Models designated FCW are water-cooled which reduces the noise level and reduced heat generation to the laboratory environment. Units are conveniently filled from the front and have a removable venting grid.FC units feature a built-in 1.2kW heater to facilitate cooling and heating applications for temperatures from -25 °C to +80 °C with an adjustable ratio for inlet/outlet temperature. Models FC1600T and FCW2500T have a Pt100 sensor connection for external measurement and control, temperature recorder and connections for external programming. All FC units have RS232 interface with connections for standby input and alarm output. FC models supplied with 2 barbed fittings for 8 and 12 mm internal ID tubing. Pump connections M16x1 male. 230V/60Hz.
Sigma Aldrich Fine Chemicals Biosciences HuR-ARE Interaction Inhibi
A cell-permeable 2H-chromen-2-one based compound that competitively binds to Hu antigen R (HuR Ki 350 nM) and disrupts the interaction of HuR and adenine- and uridine-rich element (ARE) of target mRNAs. Displays dose-dependent binding to full-length HuR protein and to RRM1/2 fragment. Exhibits cytotoxicity towards tumor cells and reduces their viability (IC50 28.9 and 18.2 181M for HCT-116 and MioPaCa2 cells respectively). Has much reduced effect on normal WI-38 and CCD 841 CoN cells. Shown to induce cleavage of poly (ADP-ribose) polymerase and pro-caspase 3 (~ 50 181M) and reduce the half-life of Bcl-2 Msi1 and XIAP in HCT-116 cells (~20 181M) treated with actinomycin D (5 181g/ml).Please note that the molecular weight for this compound is batch-specific due to variable water content. Please refer to the vial label or the certificate of analysis for the batch-specific molecular weight. The molecular weight provided represents the baseline molecular weight without water.
Perkin Elmer US LLC PC3 Peltier Cooler Organics Sample Introduction Kit for NexION 300/350
The PC3 is a small, robust Peltier cooled cyclonic spray chamber. The PC3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC3 spray chamber enhance long-term signal stability, reduce polyatomic interferences such as oxides, and reduce solvent loading when volatile organic solvents are analyzed. The PC3 has two preset temperatures +2 °C / -5 °C and is ideal for analysis of aqueous or aqueous/organic mixtures. The PC3-LT operates at +2 °C / -20 °C to reduce the solvent load on the plasma for analysis of 100% volatile organic solvents. The sample introduction kit includes: PC3 Peltier Cooler and Power Supply Baffled Quartz Cyclonic Spray Chamber with Addition Gas Port (N8145120) PFA-ST MicroFlow Nebulizer (N8122192) 1.5 mm I.D. Quartz Injector in PFA Base (N8122413) 0.15 mm I.D. Sampling Tubing, 1 m (N8122384) 0.25 mm I.D. Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. Sampling Tubing, 1
Julabo USA Inc Each, FCW2500T recirculating chiller 2.5kW
Chillers, Julabo, FCW2500T Recirculating Cooler -25...+80 °C, water-cooled, 2.5kW cooling power; pump 28L/min to 50.8 PSI. JULABO FC units feature two separate Multi-Displays (LED) for actual and set point values. Models designated FCW are water-cooled which reduces the noise level and reduced heat generation to the laboratory environment. Units are conveniently filled from the front and have a removable venting grid.FC units feature a built-in 1.2kW heater to facilitate cooling and heating applications for temperatures from -25 °C to +80 °C with an adjustable ratio for inlet/outlet temperature. Models FC1600T and FCW2500T have a Pt100 sensor connection for external measurement and control, temperature recorder and connections for external programming. All FC units have RS232 interface with connections for standby input and alarm output. FC models supplied with 2 barbed fittings for 8 and 12 mm internal ID tubing. Pump connections M16x1 male. 230V/60Hz.
Across International Ai -30°C 30L Recirculating Chiller with 20L/Min Centrifugal Pump
Ai C30 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
Med Vet International Miltex Prichard Periosteal Elevator Double-Ended 10 4mm And 25mm Wide DELPR3
Miltex Prichard Periosteal Elevator Double-Ended 10 4mm And 25mm Wide DELPR3
Julabo USA Inc Each, FL2506 chiller, -15+40C, 2.5 kW, 230V/60Hz
Chillers, Julabo, FL2506 Recirculating Cooler -15…+40 °C., 2.5 kW cooling power; ±0.5°C stability. Proportional cooling control adjusts the cooling power to the load of the application saving energy. Units incorporate RS232 interface and alarm output for PC integration and control. Models include a splash-proof membrane keypad with LED temperature display. Easy filling / draining with a fill level indicator and overflow port on the back. Units constructed of stainless steel and high-grade plastic with stainless steel internal tank. Centrifugal pressure pump. Units with 3 and 6 bar pump include internal by-pass for pressure adjustment with analog pressure gaugeMay be used with water, water/glycol mixtures and silicone fluids.The FL300, FL601, FL1201, FL1701, FLW1701 come with 8 and 12 mm hose barbs. The FLxxx3 models come with 3/4″ hose barbs. The FLxxx6 models come with 1″ hose barbs. (pump connections with G 1 1/4" male)
Julabo USA Inc Each, FLW20006 chiller, -25+40C, 20 kW, 208-230V/3PPE/60Hz
Chillers, Julabo, FLW20006 Recirculating Cooler -20…+40 °C., water-cooled; 20 kW cooling power; ±0.5°C stability. Proportional cooling control adjusts the cooling power to the load of the application saving energy. Units incorporate RS232 interface and alarm output for PC integration and control. Models include a splash-proof membrane keypad with LED temperature display. Level indicator and overflow port on the back. Units constructed of stainless steel and high-grade plastic with stainless steel internal tank. Centrifugal pressure pump. Units with 3 and 6 bar pump include internal by-pass for pressure adjustment with analog pressure gaugeMay be used with water, water/glycol mixtures and silicone fluids.The FL300, FL601, FL1201, FL1701, FLW1701 come with 8 and 12 mm hose barbs. The FLxxx3 models come with 3/4″ hose barbs. The FLxxx6 models come with 1″ hose barbs. Included with each unit: 2 barbed fittings for tubing 1” ID. (pump connections with G1 1/4 male)
Med Vet International Stockinette Tubular / Undercast 3M Synthetic 3 inch X 25 Yard Polyester Nonsterile, Ms03, 1 Roll
Water repellent and therefore suitable for use with Soft Cast as a waterproof cast Suitable for use with all casting materials, plaster and synthetic 3 inches x 25 yards
Med Vet International Stockinette Tubular / Undercast 3M Synthetic 2 inch X 25 Yard Polyester Nonsterile, Ms02, 1 Roll
Water repellent and therefore suitable for use with Soft Cast as a waterproof cast Suitable for use with all casting materials, plaster and synthetic 2 inches x 25 yards